wf blogs

 Floatation Therapy Blogs. Read the Latest Blogs from Float Centers and Enthusiasts and Share Your Own. Subscribe to All Your Favorites.

Float Tanks Solutions

Water Hardness in a Float Tank

What is water hardness? 

water hardness in float tankWater hardness is, at its most basic, the presence of certain minerals in water. Historically, water hardness was a measure of water’s ability to form lather during laundering. Harder water, due to it’s high calcium/magnesium content, would not lather as readily (or at all). For a long time there were many different scales for this, due to different countries with different languages measuring different chemical reactions.

Today we measure Total Hardness, the total amount of both calcium and magnesium in the water, in parts per million (ppm). There are also individual tests for magnesium hardness and calcium hardness. Total hardness is not useful for float tanks, since we add about 300,000ppm of magnesium sulfate to our water.

The measurement you would potentially find useful to your tank would be calcium hardness, and even that is not really necessary to monitor.

Why do we (usually) measure water hardness?

High calcium hardness can cause scaling, a crusty precipitation of excess calcium. This is especially harmful to water heaters, as calcium has an inverse temperature solubility; in water, calcium is exothermic, which means it gives off heat when combining with water. This also means that the warmer the water, the less calcium can remained dissolved in it. For this reason water heaters are particularly vulnerable to excessive scaling, which can cause the heater to work harder to less effect. This not only raises the cost of heating your water, but will ultimately result in the heater failing.

Float Tanks Solutions

How to Test the Quality of Float Tank Water

In a perfect world, you could just pour water and salt into a float tank and it would stay pure and clean and fresh and salty forever. In the real world, conditions in the water are constantly changing, so keeping your water in perfect condition takes a fair amount of work and vigilance.

Water that isn’t maintained properly can lead to bad float experiences and become unsanitary and unsafe.

We test the condition of our water twice a day using a variety of measurements, basically one for every important variable water condition. Because some of our tests take a bit of time, we gather water samples from the tanks in between floats and perform measurements later when we aren’t busy transitioning rooms and checking in floaters.

Everyday, we check the following conditions in our tanks – temperature, temperature setting, filter psi, water depth, specific gravity, hydrogen peroxide concentration, alkalinity, and pH levels.